The application of controllable inverter-based series compensation to power oscillation damping.

Abstract

Poorly damped oscillations that occur between the generators in large interconnected power systems often limit the amount of power that can be transmitted through a transmission corridor and are a threat to secure system operation. Coordinated insertion and removal of capacitors in series with a transmission line is one of the approaches that has been known for many years to be capable of enhancing the damping of power system oscillations. Unfortunately however, this approach historically relied on the operation of mechanical circuit breakers which were too slow and unreliable for the high-speed and repetitive operation that such an application demands. Recently-emerged, high-speed power-electronic-based switching devices are finding increasing use in modem power systems in the so-called Flexible AC Transmission Systems (F ACTS) concept. One particular FACTS impedance controller, namely the inverter-based series compensator, can rapidly alter the magnitude of capacitive compensating reactance in series with the line to make it practically feasible to enhance the damping of power system oscillations via dynamically-controlled series compensation. This thesis identifies, in the literature, an insightful approach to the design of an idealised controllable series compensator (CSC) damping scheme; such an approach has been considered in the analyses of the thesis. Three mathematical models of a single-machine infinite bus (SMIB) system are developed and are subsequently used in the initial design and analysis of a CSC damping controller carried out in the thesis. The simple SMIB system case study is used to identify and investigate the factors that have a significant impact on the performance of a CSC damping controller before studying the more complex issue of inter-area mode damping using a CSC. This thesis successfully confirms the results of a previous analytical study in which an idealised representation of the CSC was used, and extends the scope of that previous study by also considering a detailed representation of one particular type of CSC: the inverter-based series compensator. The two key findings of this extended investigation are that the inverter-based form of controllable series compensator can successfully be used to damp power oscillations and that, where the damping of oscillations is the particular focus of study, an idealised representation of the inverterbased CSC is suitable for the analyses. In the case of the inter-area mode damping problem, the selection of an appropriate input signal to the CSC damping controller is a key issue, since the oscillations that are to be damped involve a number of participating generators. This thesis examines the suitability of a few candidate input signals that have been proposed in the literature using the conceptually simpler SMIB system analytical models that have been developed. Finally, the thesis applies the understanding of CSC damping controller design gained from the SMIB study to the problem of inter-area mode damping on a four-generator study system. Time-domain simulation results are presented to demonstrate the impact of the controlled inverter-based series compensator on the damping of the inter-area mode of this system.