Quadrature spatial modulation aided single-input multiple-output-media based modulation: application to cooperative network and golden code orthogonal super-symbol systems.

Abstract

SIMO-MBM (single-input multiple-output media-based modulation) overcomes the limitations of SIMO (single-input multiple-output) systems by reducing the number of antennas required to achieve a high data rate and improved error performance. In this thesis, the quadrature dimension of the spatial constellation is used to improve the overall error performance of the conventional SIMO-MBM and to achieve a higher data rate by decomposing the amplitude/phase modulation (APM) symbol into real and imaginary components, similar to quadrature spatial modulation (QSM). The average bit error probability of the proposed technique is expressed using a lower bound approach and validated using the results of Monte Carlo simulation (MCS). The proposed system also investigates the effect of antenna correlation in combination with channel amplitude to select a sub-optimal mirror activation pattern. The results of MCS show a 3.5dB improvement at 10b/s/Hz with m 𝑚𝑟𝑓=2 and a 7dB improvement at 12b/s/Hz with 𝑚𝑟𝑓=2 over the traditional SIMO-MBM scheme. The effect of imperfect channel estimation on the proposed scheme is investigated, with a trade-off of 2dB in coding gain due to channel estimation errors. Cooperative Networking (CN) improves wireless network reliability, link quality, and spectrum efficiency by collaborating among nodes. The decode and forward relaying technique is used in this thesis to investigate the performance of QSM aided SIMO-MBM in a Cooperative Network (CN). This technique uses two source nodes that simultaneously transmit a unique message block on the same time slot to the relay node, which then decodes the received message block from both transmitting nodes before re-encoding and re-transmitting the decoded message block in the next time slot to the destinations in order to significantly improve the QSM aided SIMO-MBM’s error performance. Using network coding (NC) techniques, each Node can decode the data of the other Node. To enhance network performance, complexity, robustness, and minimize delays, data is encoded and decoded in NC; algebraic techniques are applied to the detected message to collect the various transmissions. The proposed scheme's theoretical average error probability was defined using a lower bound technique, and the results of Monte Carlo simulation (MCS) validated the result. The MCS results achieved exhibit a significant improvement of 8 dB at 6 b/s/Hz and 12 dB at 8 b/s/Hz over the conventional QSM aided SIMO-MBM scheme. The media-based modulation (MBM) technique can achieve significant throughput, increase spectrum efficiency, and improve bit-error-rate performance (BER). In this thesis, the use of MBM in single-input multiple-output systems is examined using radio frequency (RF) mirrors and Golden code (GC-SIMO). The goal is to lower the system's hardware complexity by maximizing the linear relationship between RF mirrors and spectral efficiency in MBM in order to achieve a high data rate with less hardware complexity. The GC scheme's encoder uses orthogonal pairs of the super-symbol, each transmitted via a separate RF mirror at a different time slot to achieve full rate full diversity. In the results of MCS obtained, at a BER of 10−5, the GC-SIMO-MBM exhibits a significant performance of approximately 7dB and 6.5 dB SNR gain for 4 b/s/Hz and 6 b/s/Hz, respectively, compared to GC-SIMO. The proposed scheme's derived theoretical average error probability is validated by the results of the Monte Carlo simulation.