Repository logo

Browsing by Author "Shoba, Siyabonga Blessing."

Filter results by typing the first few letters
Now showing 1 - 1 of 1
  • Thumbnail Image
    Item
    Metallophthalocyanine-based electrochemical sensors for accurate qualitative and quantitative analysis of emerging pollutants in water resources.
    (2024) Shoba, Siyabonga Blessing.; Booysen, Irvin Noel.; Mambanda, Allen.
    Water is a precious resource and safeguarding it from pollution is paramount to ensure the well-being of both the environment and human health. Emerging contaminants such as pharmaceuticals and heavy metals pose significant threats, necessitating vigilant monitoring and appropriate action. Traditional laboratory-based analytical techniques like Gas Chromatography, ICP-OES and HPLC have been instrumental in quantifying pollutants. However, their high operational costs, maintenance requirements and the need for specialized personnel limit their widespread use, especially in resource-constrained countries. Electrochemical sensors have emerged as a promising solution. They provide real-time, portable and cost-effective options for on-site detection of pollutants in water. Current advancements in electrochemical sensors are centred around achieving selective detection using chemical modifiers, all while maintaining electrocatalytic sensitivity and reproducibility. These sensors can be tailored to target specific contaminants, making them highly efficient tools for monitoring water quality and ensuring the sustainability of this invaluable resource. In the first experimental chapter, a glassy carbon electrode (GCE) was modified by an asymmetric metallophthalocyanine (MPc) complex, A3B-CoPc-flav (where A = flavonyloxy substituent and B = an alkynyloxy substituent/molecular mast). The modification of an electrode was achieved via electrochemical grafting followed by clicked chemistry between the diazonium-functionalized GCE and the a-CoPc-flav3 to afford the GCE|clicked-a-CoPc-flav3. The chemically modified electrodes (CME) were utilized as electrocatalytic detectors for dopamine (DA) under optimized conditions. The response of the GCE|clicked-a-CoPc-flav3 was linear in the concentration range of 2 μM to 14 μM, attaining limits of detection and quantification of 0.311 and 0.942 μM, respectively, and high reproducibility (%RSD of 2.25%, N = 3). Interference studies were conducted, revealing a marginal shift in the DA peak potential in the presence of interfering substances. Despite this shift, the peak current intensity of DA remained largely unaffected, affirming the selectivity and accuracy of the CME. The analytical capabilities of the CME were further assessed using real water samples. The obtained percentage recoveries of (97.1%) of DA by the GCE|clicked-a-CoPc-flav3 and the well-established HPLC-MS method (113%) are both within the acceptable range of 80-120%. In the second experimental chapter, a platinum electrode (Pt) was modified via the electropolymerization of polypyrrole (PPy) after its co-electrodeposition of tetra-[4-((1H benzotriazole)methoxy)phthalocyaninato]cobalt(II) (CoPc-Bzt). The electrodeposition of CoPc-Bzt was performed in 1:1 DMF/acetonitrile containing 1 M tetrabutylammonium hexafluorophosphate (NBu4PF6) electrolyte over 20 cycles using cyclic voltammetry to afford a Pt|PPy/CoPc-Bzt (Bzt = benzotriazole). The resultant CME was prone to fouling by the analyte of interest, mercury(II). Due to fouling the differential pulse anodic stripping voltammetry (DPASV) was used to detect Hg(II) using the Pt|PPy/CoPc-Bzt within 10 μM to 100 μM linear range. The LOD and LOQ were found to be 3.11 and 10.00 μM, respectively. Interference studies illustrated that the detection capabilities of the CME were not affected by the presence of other heavy metal cations. The analytical performances of Pt|PPy/CoPc-Bzt (97.4%) and Inductively coupled plasma – optical emission spectroscopy (ICP-OES) (112.3%) are both within the acceptable range of 80-120%. In the third experimental chapter, the Pb electrocatalytic sensing capability of a gold electrode modified via the adsorption of electrospun nanofibers (ENFs) and Nafion (Nf) as an annealed conductive top-layer was evaluated. The fabricated ENFs comprised of a core polymeric nanocomposite of tetra-4-(3-oxyflavonephthalocyaninato)cobalt(II) (CoPc-flav), the carboxylic acid functionalized multiwalled carbon nanotubes (f-MWCNTs) and polyaniline (PANI) encapsulated in a polyvinyl acetate (PVA) ENFs. The resultant CME, Au|ENFs-1-Nf was not prone to fouling as was found when using the bare and the other constructed CMEs whose signal stabilities were compromised by background electrolyte currents. The Au|ENFs-1-Nf electrode could detect the Pb(II) cations in a reproducible manner (%RSD of 3.92%, N = 3) ranging from 8 to 125 μM, and limits of detection and quantification of 0.51 and 1.55 μM were obtained, respectively. However, the interference studies illustrated that the detection capabilities of the CME are severely compromised by the presence of other heavy metal cations. The analytical performance of the CME rendered a comparable percentage recovery (103%) with that of the ICP-OES (115%). In the fourth experimental chapter, the nanofabrication and characterization of new conductive materials, PANI-CoPc-fur (1) ((PANI = polyaniline and CoPc-fur = tetra-4-(2-furanmethylthiophthalocyaninato)Co(II)) and PANI-CoPc-fur-f-MWCNTs (2) are reported. Subsequently, an electrospun nanofiber (ENF) composite was fabricated where the core comprised of 2 that was encapsulated with a PVA shell. The resultant nanoconjugate, ENFs-2 was adsorbed on a glassy carbon electrode (GCE) followed by the immobilization of a permeable adhesion top layer of Nafion (Nf) to render the chemically modified electrode, GCE|ENFs-2-Nf. The classical physical properties of the electron-mediating layer for the CME synergistically aided in promoting its electrocatalytic activities. Consequently, the CME showed greater anodic and cathodic cyclic voltammetry (CV) peak currents compared to the bare GCE and other modified electrodes, indicating its higher sensitivity to acetaminophen (APAP), an emerging water pollutant of concern. Limits of detection and quantification (LOD and LOQ) values for APAP attained by squarewave voltammetry (SWV) were lower compared to those acquired using other electrochemical techniques. The detection of APAP at the GCE|ENFs-2-Nf attained by squarewave voltammetry (SWV) was linear from 10 to 200 μM of APAP and was reproducible (%RSD of 3.2%, N = 3). The respective calculated LOD and LOQ values of 0.094 and 0.28 μM were lower compared to those acquired using other electrochemical techniques. Analysis of APAP in the presence of commonly associated interferences metronidazole (MTZ) and dopamine (DA) illustrated a significant separation between the SWV peak potentials of APAP and MTZ, whereas there was some degree of overlap between the SWV current responses of APAP and DA. The analytical performance of the GCE|ENFs-2-Nf rendered a comparable percentage recovery (103.8%) with that of liquid chromatography–mass spectrometry (LC–MS) (106%).