Adali, Sarp.Govender, Stanton Wesley.2013-06-112013-06-1120122012http://hdl.handle.net/10413/9120Thesis (M.Sc.)-University of KwaZulu-Natal, Durban, 2012.The mechanical and material properties of structural steel at elevated temperatures play an important role in structural fire design. The South African 350W and S355 structural steels are common in building structures with S355 slowly replacing the older 350W. The cost and feasibility of full scale fire tests are some of the causes for the lack of experimental data on the behaviour of steel structures when exposed to fire. Therefore excessively conservative design codes based on isolated laboratory experiments are used in practice which leads to increased material costs. Another area of concern with respect to building safety is the reusability of structural steels post fire exposure, which is not effectively addressed within these codes. This study aims to establish greater insight into structural fire design and simulation on which further research can be built. Experimental programs on the temperature dependent behaviour of these steel members loaded axially are conducted and compared with theory and the Eurocode 3 standard [1]. The reusability of steel exposed to fire and after being cooled down is investigated and compared to the findings by Outinen [2]. Further testing on material to determine the relationship between remaining life and hardness degradation after cooling down was conducted. Experimental data from various external studies are used to develop novel computer models using the finite element analysis software, SimXpert [3]. These are verified against the original data and compared to existing design codes. A parametric approach is used with these models to demonstrate the advantages of computer simulations in structural fire design. Different cross sections and slenderness ratios are evaluated for their susceptibility to buckling at elevated temperatures. The results of this study show that as temperature and exposure time increase the integrity of steel members decrease. The current design codes accurately predict the behaviour of isolated specimens but lack data on real situations where the specimen is part of a complex structure. It was found that steel members can be reused if their exposure temperature does not exceed 700°C, after which their strength can reduce to 90%. This temperature dependant behaviour was successfully modelled using basic computer simulations and then demonstrated the ease in which they can be used in place of experimental regimes. The parametric advantages of these simulations were demonstrated by predicting the effects of slenderness ratios and geometry cross sections on the buckling behaviour.en-ZASteel, Structural--Testing.Steel, Structural--Fatigue.Building, Fireproof.Fire protection engineering.Fire resistant materials.Theses--Mechanical engineering.Thesis