Voltage unbalance emition limits for new connections including single phase MV systems.
| dc.contributor.advisor | Ijumba, Nelson Mutatina. | |
| dc.contributor.advisor | Koch, Robert G. | |
| dc.contributor.author | Maloko, Thabane Silas. | |
| dc.date.accessioned | 2012-10-14T13:15:32Z | |
| dc.date.available | 2012-10-14T13:15:32Z | |
| dc.date.created | 2011 | |
| dc.date.issued | 2011 | |
| dc.description | Thesis (M.Sc.Eng.)-University of KwaZulu-Natal, Durban, 2011. | en |
| dc.description.abstract | Voltage unbalance performance of a power line depends on a few parameters that are not necessarily constant at any given instance. The random nature of a power system raises questions around the ability of a system planner to allocate equitable share of the power quality parameters, like voltage unbalance, at design stage. Even a more interesting question is whether applying current methods will guarantee that emissions will be under the set limits. The presence of single or dual phase feeders on such a line will result in a more dynamic voltage unbalance. The first part of this research is a study on deterministic method of voltage unbalance allocation presented by the IEC. The IEC 61000-13-3 report is a comprehensive guideline and the best place to start when looking to develop an emissions standard for voltage unbalance. This dissertation presents a method that can be used to set planning levels for unbalance emission at various voltage levels in order to avoid high voltage unbalance at the end user. The method depends on the agreed power of the customer, the power of the unbalanced load, and the system characteristics. The method works well for short feeders with roughly the same negative sequence impedance and equal short circuit levels. In South Africa, however, there are radial feeders that span over 100km. Hence on such a feeder, there can be ratios of 1:10 between sending end and the last customer on the line. Preliminary research revealed that IEC 61000-6-3, a report on allocation of harmonics, has a method applicable to long feeders. This method was investigated extensively and applied to voltage unbalance allocation. At the core of the method is the assumption that feeders have an even distribution of load. To illustrate the application of this method an example is given. The second part of the study explores a stochastic method of voltage unbalance allocation. In this study the possibility of random connection is considered. A Monte Carlo study is presented. The impact of various parameters are analysed and the findings reveal that phase allocation has the most influence on emission. The results show that the method of random connection of loads can be applied in special conditions only i.e. were sizes of loads do not differ greatly and the number of required connections are low. | en |
| dc.identifier.uri | http://hdl.handle.net/10413/6882 | |
| dc.language.iso | en_ZA | en |
| dc.subject | Electric power systems--Control. | en |
| dc.subject | Electric power systems stability. | en |
| dc.subject | Electromotive force. | en |
| dc.subject | Theses--Electrical engineering. | en |
| dc.title | Voltage unbalance emition limits for new connections including single phase MV systems. | en |
| dc.type | Thesis | en |