Repository logo
 

Aspects of the engineering geology of Maputo City, Mozambique.

Loading...
Thumbnail Image

Date

2011

Journal Title

Journal ISSN

Volume Title

Publisher

Abstract

The geological formations of Maputo City, which are mainly unconsolidated materials with soil like properties, are described in terms of their engineering geological and geotechnical characteristics with relevance to their distribution patterns and spatial trends. Problematic conditions such as collapse potential characteristics, loose aeolian sand dune deposits and loose sand plains characterize many of the materials. The geological characteristics combined with anthropogenic interference such as intensive urbanization with inappropriate land use, construction in sensitive areas like steep sandy slopes has led to many problems including slope stability. Foundation problems with building settlement and gully erosion also occur. The aim of this research was to study the engineering geological characteristics and the geotechnical properties of the geological formations of Maputo City and various related problems. Special relevance has been given to the understanding of three specific problems: building damage, gully erosion and slope instability. The geological formations are predominantly sandy (coarse to very fine sand) with very low clay content, are non-plastic and are classified as from the group SP-SM which are poorlygraded sand with silt. The majority of the materials are loose and normally consolidated with a high level of residual strength. Assessment of collapse settlement through double consolidation technique indicated soil compressibility and significant sensibility to collapse upon wetting. Truly collapsible soils that show full collapse of the soil structure were identified in 33% of the tested materials where the highest collapse behaviour reached values above 5%, predicted to cause moderate trouble in foundation design. Some of the bonded materials are bonded (evident in 67% of samples tested). Bonding was confirmed by comparing the compressibility of the undisturbed and remoulded samples. The remoulded samples showed a significantly higher compression than that of the bonded materials as part of the stress applied is carried by the bonds themselves, as the bonded material is stiffer than the same without bonds. The curves of the remoulded samples were used to establish the limit between the stable and meta-stable states of the material. A qualitative evaluation of the erosion susceptibility was investigated by physical tests such as the crumb test, shear strength and chemical indicators while a quantitative evaluation of the erodibility characteristics was obtained using a flume test. Some correlations were found between the results of various methods. Almost all samples that were found to be dispersive with ESP were also dispersive with TDS vs. %Na and SAR. Results of the flume erodibility test have very little correlation with the chemical properties related to dispersion revealing that the erosion susceptibility and gullying in Maputo City have more relation to the physical processes than to the dispersion related chemical properties of the soils. The positive identification of dispersive and erodible soils can only be carried out using a combination of various techniques. Therefore, a new rating system for erosion susceptibility of sandy soils combining the physical and chemical factors of dispersion is proposed including the flume test, crumb test, TDS/%Na, SAR and ESP. The proposed rating system was applied to the tested soils of Maputo City. Fifteen samples (83% of the rated samples) were classified with intermediate susceptibility to erosion while 3 samples (17%) were classified as having a low susceptibility to erosion. The highest rating scores were obtained by the same samples that showed dispersive behaviour with SAR, ESP and TDS/%Na. This group of samples was of intermediate erodibility in the flume test. The slope instability mechanisms observed in Maputo City are predominantly rotational failures with a mass of soil sliding along a curved surface of rupture followed by sand flow at the toe as failure occurs in the presence of excess water. Four groups of factors account for the slope instability problems in Maputo City: geomorphological causes, physical and meteorological causes, geological and geotechnical properties of soils, and anthropogenic causes. The mechanism of failure is mostly due to the loss of matric suction of soils in the presence of rainwater and possibly from destruction of bonding agents. Factors of safety values indicate that the slopes are generally unstable with the control being the slope angle. The slopes in the Polana-Caniço and Ferroviário Quarters show high factor of safety values but is the area most affected by slope instability. Slope failure in these areas is intrinsically caused by anthropogenic factors related to inappropriate land use planning. The gully sidewalls are unstable as the slope created is very steep. The slope at Friedrich Engels Avenue causes most concern due not only to the slope height and angle but also to the size and number of buildings constructed at the crest, mainly high rise buildings along the Julius Nyerere Avenue, the integrity of which could be threatened by a landslide event (this slope has recently been affected by active landslides).

Description

Thesis (Ph.D.)-University of KwaZulu-Natal, Westville, 2011.

Keywords

Engineering geology--Maputo (Mozambique)., Theses--Geology.

Citation

DOI