Show simple item record

dc.contributor.advisorMilan, C.
dc.creatorMoodley, Shanita Jeewan.
dc.date.accessioned2012-03-13T12:02:58Z
dc.date.available2012-03-13T12:02:58Z
dc.date.created2011
dc.date.issued2011
dc.identifier.urihttp://hdl.handle.net/10413/5095
dc.descriptionThesis (M.Sc.Eng.)-University of KwaZulu-Natal, Durban, 2011.en
dc.description.abstractPolychlorinated Biphenyls (PCBs) are hazardous and toxic chemicals to both humans and animals. In the late 1960’s PCBs were discovered to be a harmful pollutant which could cause environmental contamination due to its slow degradation and even trace amounts of PCBs were regarded as toxic to both human and animals. Oil spills are a frequent occurrence at Eskom substations which could contain PCBs. The contaminated sediments which are easily carried away by rain and wind can further contaminate the environment and aquatic bodies. Eskom currently disposes of soil and ballast stones contaminated with PCBs by thermal destruction. This is a costly process as PCBs are regarded as hazardous materials and needs to be safely transported and disposed of at a licensed disposal facility. Based on literature, ozone has been used on a laboratory scale to treat soil contaminated with PCBs with the addition of chemicals such as hexane and acetone which assist in breaking down PCBs. The objective of this study was to evaluate whether ozone without the addition of chemicals could reduce the levels of PCBs present in contaminated soil. In this study, two soil samples and one ballast stone sample were contaminated with 50 ppm, 200 ppm and 600 ppm of PCBs and then exposed to 0.4, 0.5 and 0.6 l/min of ozone for a period of 60 minutes to examine the effects of increasing ozone flow rates on PCB destruction in soil. The results of the experimental tests showed that ozone gas reduced the concentration of PCBs in the soil and ballast stone samples for the different total gas flow rates. The literature study identified that the final products of the ozonation of PCBs are carbon dioxide and water and that any products formed after this process could possibly be degraded by the soil natural microorganisms. Calculations based on the Shin et al. (2004) model proved that ozone was in excess after the ozonation process. The results of the experiments also confirmed this, as the PCB residuals were similar for all three total gas flows, which showed that there was no dependence on the gas flow rates hence, ozone was in excess. The experimental data was then trended with zero, first and second order reaction equations, which showed that the best fit was obtained with the firstorder reaction equation. It is recommended that ozone be used for the treatment of PCB contaminated soil at Eskom substations.en
dc.language.isoen_ZAen
dc.subjectPolychlorinated biphenyls.en
dc.subjectOzonization.en
dc.subjectSoil remediation.en
dc.subjectTheses--Chemical engineering.en
dc.titleThe evaluation of ozone technology to reduce the concentration of polychlorinated biphenyls (PCBs) in contaminated soil.en
dc.typeThesisen


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record