Repository logo
 

Pyrolysis of chlorinated hydrocarbons using induction heating.

Loading...
Thumbnail Image

Date

2004

Journal Title

Journal ISSN

Volume Title

Publisher

Abstract

Chemical and allied industries produce significant quantities of chlorinated wastes each year. Thermal treatnent of these chlorinated wastes has a long and controversial history. The most common and contentious method of waste destruction is incineration. Although waste incinerators are designed to provide greater control over the combustion process, toxic products are inevitably formed from incomplete combustion and released in stack gases and other residues. The most notable group belonging to the products of incomplete combustion (PICs) are dioxins and furans. The fact that oxygen is an integral part of the molecular structure of dioxins and furans suggests that the formation of these particular PICs may be reduced or avoided by minimizing or completely excluding oxygen from thermal waste treatment. Pyrolysis using induction heating is a relatively new technology that has shown much promise from the initial work performed by Pillay (2001). This research was an extension of that study, and investigated equipment and process optimization as well as macroscopic modeling of different systems. The objective of this study was to establish the technology of pyrolysis using induction heating as a competitive alternative to existing waste destruction systems. The novel approach of pyrolysing compounds using induction heating was demonstrated by destroying chlorinated aliphatic, aromatic and a mixture of these compounds. These experiments were conducted at atmospheric pressure in a tubular laminar flow reactor (5.2cm I.D) under a thermally transparent argon atmosphere. In this system heat was generated in an embedded graphite tube using induction heating. Thermal degradation occurred through the bombardment of the compounds by the photons emitted from the heated graphite tube. The compounds were pyrolysed at temperatures ranging from 330°C to 1000°C and at mean residence times from 0.47s to 2.47s. In addition to these process variables the effects of reactant concentration and additives were investigated The major species formed from this thermal treatment were solid carbon black and gaseous hydrogen chloride. Destruction efficiencies (DE) of the order of 99.9999% (six nines) and greater were obtained for the different feed mixtures at their respective operating conditions. A minimum DE of six nines adequately satisfies the regulation set by the Environmental Protection Agency (EPA) for successful waste destruction.

Description

Thesis (M.Sc.Eng.)-University of KwaZulu-Natal, Durban, 2004.

Keywords

Pyrolysis., Induction heating., Hydrocarbons--Thermal properties., Waste disposal., Incineration--Environmental aspects., Theses--Chemical engineering.

Citation

DOI